When a carbide cutting tools in the machine tool chip, the processing speed is not just that we need to consider more chips have to understand the principle. As well as the chip factor. This is like in the importance of cutting edge away from the workpiece machining way. Remaining close to retract the blade material may somewhat reduce the gap. When the chips from the workpiece along the front flank blade will generate an instantaneous tensile force, often have burrs on the workpiece. The tensile force endanger the chip edge safety in dangerous situations. So as to ensure the integrity of carbide cutting tools and workpieces.

Of course, in the process of carbide cutting tools for the chip also has a certain amount of skill, here is the way we introduce the chip:

1, climb milling, the direction of rotation of the cutter and cutting feed direction is the same at the beginning of the workpiece and the cutting cutter to cut the last bite of the chip under.

2, milling, feed milling cutter rotation direction is reversed and cutting, milling before you start cutting must be some slippage on the workpiece to begin cutting zero thickness, when the thickness of the cutting end of the cutting is maximized.

It's like three-blade cutter, when some milling or face milling, cutting force have different directions. When face milling cutter just outside the workpiece, cutting force direction should pay special attention. Climb milling, the cutting force is pressed against the workpiece table, away from the table when the cutting force of the workpiece milling. This requires us to attention.

The use of carbide cutting tools directly affect the entire production process, where we choose to use carbide tools and all have a certain degree of stress, and more advice please pay attention to Changzhou too good tool Carbide Tool Co., Ltd.