Milling is a valuable tool, in order to better prolong the life of the cutter must be well maintained and maintenance, in order to maintain a good cutting, not prematurely. How can the tools for maintenance and maintenance? To solve this problem, the paper made ​​the following recommendations:

Clean rust:
     Cleaning work must be done prior to use, you can use a brush, veils and so wipe cutter, cutter clean. After milling cutters use promptly clean, remove the cutter on the water stains, perspiration and dirt, and apply anti-rust oil, while maintaining the cleanliness of the tool container, oil and other containers to avoid corrosion of the cutter knives.

Gently:
     Both high hardness, it is very difficult to repair the tool. Therefore, care must be taken when handling the cutter, the best painting with light, to avoid being scratched blade fingers; cutter must light up when you take to avoid damage to the cutter; attention to the protection of the tool, place the cutter should avoid cutting edge collision, the best tool into special containers.

Taboo beat:
     During use, do not use hard objects (such as iron and steel, etc.) on the cutter were beat and installed to avoid tool damage.

Tightening do work:
     When using the tool for cutting, be sure to tools, workpieces reasonable position, and make detention work, can not have the slightest loosening; while regularly checking the tightness of the tool do the work, in order to avoid causing the tool cutting process injury.

Tool selection:
     There are different tools for different purposes, so the actual job requirements, select the appropriate cutter, can not mess with the tool, so that the tool can not be fully utilized.

The tool can not be tampered with morphology and grinding tool:
     Each tool grinding process has professional equipment and grinding techniques, if allowed to touch or change the shape of the tool, it is easy to cause the blade fracture accidents.

Milling place:
     Cutter should be placed in a dedicated tool container, pay attention to distinguish between models. Containers of different types in the tool box knife cutter marked the best models, to avoid misplaced tool, the tool is placed to avoid confusion, use the tool to cause unnecessary trouble.

Precision cutting tool adjustment:
     Tool during use, it is inevitable because of wear and tear and other factors affect the precision cutting tool, so every once in a while to check the degree of wear of the tool carefully and properly adjust the tool clamp mounted precision parts for the situation in different periods of the tool.
 
In strict accordance with the instructions to use the tool to use:
     Note the use of the tool is undoubtedly the hand than the best materials, careful study of the use of the specification precautions, and follow the related matters. Particular attention to the use of the tool during taboo issues!